inner_banner_news
You are here: News  /  Blog

FULONGMA cleaning and sweeping vehicle function configuration introduction

2021-07-22 10:44:27

Share to:

The FULONGMA cleaning and sweeping vehicle is a high-end multifunctional sanitation vehicle based on the special chassis of Dongfeng Duolica D7 series sanitation vehicle. The sweeper integrates the functions of a road sweeper, a sprinkler, and a high-pressure washing vehicle, and can realize various functions such as road cleaning, road cleaning, curb cleaning, curb and curb facade scrubbing, low-pressure washing, spray dust removal, etc. It is suitable for cleaning operations such as mechanized cleaning, cleaning, spraying, and dust suppression of urban roads, highways, squares, airports, docks, tunnels, bridges, isolation walls, curbs, and curb facades.

1. Multi-directional picture of FULONGMA Cleaning and Sweeping Vehicle

2. Introduction of FULONGMA Cleaning and Sweeping Vehicle

3800 wheelbase, Yuchai 196 horsepower engine, 245/70 tubeless tires, with original air conditioner, central locking electric doors and windows, Cummins 140 horsepower auxiliary engine, 4 square water tanks and 5 square dust tanks, stainless steel cabinet, PLC one-key control. 2 central sweeping plates, Sanyo motor, high-pressure water pump imported from Germany (front flush/side spray/middle spray/rear spray/side flushing car water gun/trash can self-cleaning device). Universal high-pressure road edge cleaning, low-pressure pump front flush. Stainless steel water tank, dustbin, stainless steel high-pressure pipeline, Schneider control switch, American sensor; LED arrow lights at the tail, engine oil, dustbin, water tank are equipped with anti-overflow and low water level alarm devices. Indoor monitor for reversing and washing and sweeping, 18m high-pressure washing reel, maximum sweeping width of 3.5m, high-pressure washing height ≧21m.

3. FULONGMA Cleaning and Sweeping Vehicle configuration

(1) The Cleaning and Sweeping Vehicle adopt the special chassis of Dongfeng Dolica cleaning and sweeping vehicle. Dolica’s new luxury cab is equipped with direction assist, clutch assist, and ABS as standard. The configuration is rich and practical! The cab can be turned forward, which helps the engine Overhaul and maintenance.

(2) Yuchai’s 196-horsepower diesel engine is used for the chassis engine of the sweeper, and its emissions have reached the National Sixth Standard. Guangxi Yuchai Machinery Group Co., Ltd. is a well-known engine manufacturer in China with many years of production and R&D experience and mature product technology. , The quality is guaranteed.

(3) In terms of gearboxes, the National Sixth Dongfeng Duolika 9-Sweeping Sweeping Vehicle is equipped with a Wanliyang 6-speed manual gearbox with clear gears and easy shifting.

(4) In terms of chassis, this National Sixth Dongfeng Dolica 9-square cleaning and sweeping truck uses a 4 tons front axle, 7 tons reinforced rear axle, and the tires are equipped with 8.25R20 steel wire tires, which has a stronger carrying capacity!

(5) In terms of cabinet material, this National VI Dongfeng Dolica 9-square cleaning and sweeping truck uses stainless steel and has a simple anti-corrosion and rust-proof treatment inside the cabinet, which greatly extends the service life of the cabinet.

(6) After continuous optimization and upgrading, the volume of the clean water tank of this National VI Dongfeng Dolica 9-square sweeper has reached 4 cubic meters, and the volume of the garbage bin has reached 5 cubic meters, which can last for more than 4 hours.

(7) The Cleaning and Sweeping Vehicle is equipped with two sets of high and low water systems, which can realize the functions of high-pressure washing and low-pressure watering.

(8) The washing and sweeping vehicle adopt the intelligent control mode of the cab. The sanitation workers can complete all the operations of the vehicle in the cab and are equipped with high-definition cameras at the right sweeping pan and at the rear. They can instantly control the working status of the vehicle while working. Adjustment.

(9) There is a 20-meter high-pressure washing reel on the left rear of the washing and sweeping vehicle, which can be used to wash the car body, and can also be used to wash the factory building, curtain wall, etc.

(10) The garbage bin of the Cleaning and Sweeping Vehicle has a self-cleaning function. After the garbage dump is completed, the residual garbage in the bin can be washed away, reducing the burden of sanitation workers.

(11) The washing and sweeping vehicle can also be equipped with other functions according to the different needs of users, such as snow removal, high-pressure spray, etc.

4. FULONGMA Cleaning and Sweeping Vehicle special function

(1) The Cleaning and Sweeping Vehicle adopt the structure layout of “two sweeping discs in the middle + spray dust reduction + wide suction nozzle in the middle (built-in high-pressure spray rods and high-pressure spray rods on both sides)”, which has a better cleaning effect on muddy roads. During the cleaning process, the sand and gravel will not splash and raise dust. This layout is convenient for the adjustment and maintenance of the cleaning device and the suction cup, and the vehicle has good passability during the transfer operation.

(2) The left and right vertical scanning is a single scanning plate, which reduces the number of brushes and the consumption of brushes, and can reduce the cost of use. The left and right vertical sweeps are controlled separately, and different operation modes such as left sweep, right sweep, and full sweep can be realized. The width of the suction mouth of the wide suction nozzle reaches 2418mm, ensuring that the total working width is greater than 3.5mm. The 4 height-adjustable nozzle wheels can adjust and ensure a reasonable gap between the nozzle and the road surface. The suction nozzle has a built-in high-pressure water spray rod, and as many high-pressure washing nozzles as possible are arranged inside the suction nozzle, which not only has a good cleaning effect but also minimizes the secondary pollution caused by the high-pressure water jet washing up the dirt.

(3) The left and right spray rods are installed on the suction cups, which rise and fall with the suction cups. The structure is simple and compact to ensure that the height of the spray rods from the ground remains constant and achieves the best cleaning effect. The open hydraulic system drives the left and right vertical sweeping and lifting, the left and right sweeping pan rotation, the suction nozzle lifting, the opening and closing of the back door of the dustbin, and the dumping and resetting of the dustbin.

(4) The low-pressure front rush function is located behind the front wheels and adopts pneumatic control. The control switch is located in the cab, which makes the operation more convenient. The power take-off on the chassis gearbox side drives the low-pressure water pump to realize the low-pressure flushing function of the sprinkler. The low-pressure water pump adopts the Hangzhou Weilong pump, which is ranked first in domestic quality, and its core components are imported from Japan. It has high pressure and sufficient water volume. The two-way hedge can reach 6 lanes and 21 meters or more, and its performance is even ahead of the same level of sprinklers.

(5) The washing and sweeping vehicle integrate high-pressure angle spray functions on the left and right sides under the cab, which can powerfully wash the curbs and curbs. The nozzle supports 360-degree adjustment, and the nozzle is made of high-quality stainless steel, which is not easy to rust and is durable!

(6) The washing and sweeping vehicle is also equipped with a set of high-pressure nozzles on the rear bumper to suppress the dust caused by the rotation of the rear wheel. When the road is narrow, it can also replace the sprinkler to achieve the spray dust reduction function.

(7) The rear of the washing and sweeping vehicle is equipped with LED arrow lights as standard, which can effectively remind the passing pedestrians and vehicles during the cleaning process to improve the safety of work and driving. The tailgate adopts a 3-hook locking design, hydraulic opening and closing, and better sealing performance!

In addition to the above functions, the FULONGMA sweeper can also be equipped with a snow removal shovel, front electric sprinkler, high-pressure spray dust suppression, and other functions according to the user’s actual care needs, which can truly realize multiple uses of one car!

RELATED NEWS